-added a dely to DetectLoop after a positive motion detection to
prevent motion event overlap.
-moved the 2 image diff pair compair to proper "end of array" in
DetectLoop.
-increased the size of the image stream so queded up events will
be able generate thumbnails properly.
-cleaned off a bunch of unused parameters in the code.
-adjusted the default motion sensitivity after real world
testing.
-added libfuse-dev to setup.sh since imagemagic needs that to
operate.
The Qt approach to grabbing frames from the live stream was also
a failure.
- decided to switch to a combination ffmpeg and imagemagic was
external commands to do motion detection. this approach
elimates the need for opencv altogeather so it was removed
from the project. system resource usage appears to be decent
and perhaps better than opencv.
Got the app up to "not failing immediately" state.
However, for some reason DetectLoop is failing hard via opencv
being unable to open the stream clips.
I'll continue deep diving this. For now everything else works.
Added the much need code in Camera object to actual start all of
the threads.
Added multi instance support via the -d option.
Made the Loop object loop structure slot-signal compatible so
all objects using it can interupt the main loop to run other
slots.
Completely re-written the project to use the QT API. By using Qt,
I've open up use of useful tools like QCryptographicHash, QString,
QByteArray, QFile, etc.. In the future I could even make use of
slots/signals. The code is also in general much more readable and
thread management is by far much easier.
General operation of the app should be the same, this commit just
serves as a base for the migration over to QT.
the delay on the motion detection loop slowed it down too much to
the point that it falls too far behind live. I removed the delay
and re-introduced the frame gap so all frames in the video files
need to be decoded.
post command and event timers are now seperate but still tied to
a single thread so they can still be synced.
fixed an issued that cuased several thmubnails to not generate.
added more log lines the aid with debugging.
- reduced the hls size to 2 seconds.
- motion clips are not being combined. fixed it by making event
loop track the size of shared_t::recList instead of system time.
- maxScore is now global inside of shared_t instead of locally
inside detectMoInStream().
Fixed the crashing issue by adding tcp timeout args to ffmpeg and
having the app handle empty frames from a disconnected camera
better.
Reformed the directory structure by having live, logs and events in
seperate directories.
schLoop() no longer exists, postCmd is now handled by
detectMoInStream() to ensure motion detection is not done while the
command is running.
Apparently native html5 or modern browsers do not support running .m3u8
playlist directly or I was missing something in the original code. Even
adding the correct mime types in apache2 didn't work so I decided to
embed hls.js into the video html files to support hls playlist.
Logs are not rotating correctly. Changed up the code to append the logs
in memory and then dump them to permanent storage on every loop of
upkeep(). Hopefully this fixes the issue.
Completely reformed the internal workings of the application code. I
brought back multi-threaded functions so there is now 5 separate threads
for different tasks.
recLoop() - this function calls ffmpeg to begin recording footage from
the defined camera and stores the footage in hls format. It is designed
to keep running for as long as the application is running and if it does
stop for whatever reason, it will attempt to auto re-start.
upkeep() - this function does regular cleanup and enforcement of maxDays
maxLogSize and maxEvents without the need to stop recording or detecting
motion.
detectMo() - this function reads directly from recLoop's hls output and
list all footage that has motion in it. motion detection no longer has
to wait for the clip to finish recording thanks to the use of .ts
containers for the video clips. this makes the motion detection for less
cpu intensive now that it will now operate at the camera's fps (slower).
eventLoop() - this function reads the motion list from detectMo and
copies the footage pointed out by the list to an events folder, also in
hls format.
schLoop() - this function runs an optional user defined external command
every amount of seconds defined in sch_sec. this command temporary stops
motion detection without actually terminating the thread. It will also
not run the command at the scheduled time if motion was detected.
Benefits to this reform:
- far less cpu intensive operation
- multi-threaded architecture for better asynchronous operation
- it has support for live streaming now that hls is being used
- a buff_dir is no longer necessary
The fork() architecture from the previous commit is also deemed a
failure. Reverted back to v1.5.t19 code. I'll start from scratch, using
this commit as the new base.
going back to basics. removed all threading code and opted for a multi
process architecture using fork(). previous code had a bad memory leak
and doesn't handle unexpected camera disconnects and for some reason it
also didn't recover gracefully in systemctl when it crashes. Hopefully
this new re-write fixes all of those numerous issues.
moDetect() will now try multiple times to grab buffer footage before
giving up and moving on.
The crashing problems may have started after switching my test machine
to to multiple config file setup. I'll test this theory by completely
removing the multiple config file feasure and see if it crashes again.
I'll figure out a better solution for multi config files in the next
round of deveoplment.
Added string trimming to the vid_container parameter to filter out bad
user input.
Added detection_stream url to the config file and made it so the
application can now use a smaller/lower bit rate stream for motion
detection separate from the recording stream. This can significantly
lower CPU usage.
Moved away from using system() and the explicit timeout command. Instead
opted to using popen() and cancelable pthreads. Doing this pulls back
more control over ffmpeg than before and the app will now properly
respond term signals and even the CTRL-C keyboard interrupt.
The app was still cutting out last command line arg of my test setup.
Later found out it was the run script limiting the command line arg
count to 3. I extended it out to 8 but I'll need to find a better option
to make it limitless.
The is not currently parsing multiple config files properly. Changed up
the parser function without complicated check ahead logic. Will test if
this works.
Added the ability to read multiple config files so it's now possible to
load a singular global config and then load a camera specific config in
another.
Many elements in the web interface are coming out too small. Added meta
viewport device width in hopes that the web interface will self adjust
to device it is being displayed on.
Changed duration to num_of_clips and added clip_len so the amount of
seconds in each clip and the amount of clips to be processed for motion
are now adjustable.
Adjusted a several default values.
The app is still failing with intermittent moov atom failures on trying
to open the video clips with opencv VideoCapture. I suspect it is trying
to open the files while ffmpeg is not done finalizing them. Reformed the
detection loop to spawn dedicated motion detection threads for each
video clip and only when ffmpeg confirmed finished.
Thanks the debug messages, in found a potential issue with the video
clips being pulled from the in house test cameras. Sometimes the video
clips are being pulled with incomplete meta information causing opencv
to fail to open the clips. Added "-movflags faststart" to the ffmpeg
command that should hopefully fix this and should help the app to handle
unreliable camera streams more gracefully.
max_clips now defaults to 90 instead of 30.
Added the ability change the video codec via the config file.
Changed the install script to now install the application in the /opt
directory and then symm link to /usr/bin. Doing this allowed me to
create a run script to start the application and enable the
OPENCV_VIDEOIO_DEBUG parameter for opencv. This should make it easier to
diagnose video-io issues with opencv.
Updated the README documentation with all of the changes done to the
application since v1.5.
Somewhere in the code is causing an infinite loop, root cause still
undermined. added more logging statements to help me find misbehavior.
imgDiff() will now handle empty frames on the parameters more
gracefully.
enforceMaxClips() will no longer assume all video clips are accompanied
by html and jpg files but will now instead "delete if exists."
The app is hard crashing now but I was able to determine the cause this
time. Must functions in filesystem tend to abort if the filesystem
object doesn't exists. Added protection where needed to prevent crashing
Logs are still being cutoff, I'm assuming the app is crashing but can't
locate the problem without any logs. Reformed logging to never overwrite
the logs and will instead append only. Size control will be in the form
of the byte size of the log files.
Fixed a bug that caused the buffDir to get deleted before the app did
any work. Apparently the filesystem lib crashes the app if the directory
doesn't exists. Might need to add protection against that in the future.
Directory pages with now explicitly link to index.html since implicit
does not work for apache2.
The error checking with ffmpeg is not working. Learned that it doesn't
always return 0 on success. Decided to remove the error checking
altogether. Instead ffmpeg failures should be checked manually using
stderr.
Dirent includes .. and . so I decided to switch to the filesystem entry
listing that should hopefully exclude those special directories.
The camera webroot was not generating .index files. those files would
only get generated if motion was detected. Copied the code that does
that onto recLoop() to execute regardless of motion.
Fixed the default webroot directory to apache's correct webroot. Also
renamed separated outDir from webRoot and made webRoot changeable on the
config file.
Added logging the recorder and detection loops to help with debugging
and troubleshooting. Just like the video clips, max log lines were added
to control the size of the data being saved to storage.
Decided to switch using opencv's builtin pixel diff motion detection via
absdiff and thresh. Doing this should increase efficiency instead of
using the home brewed pixel loops and threads.
Added a web interface of sorts by having html files output along with
the video clips. These files are designed to link together with the
assumption that the output directory is a web root like /var/www/html
that apache2 uses. The interface is crude at best but at least allow
playback of recorded footage.
Added max_clips config variable that can limit the amount of motion
events that can recorded to storage on a single day.
completely removed object detection code because I don't foresee going
back to that model anytime soon. diffs will not reset to 0 instead
decrement and the consecutive pixel diffs are now adjustable via
consec_threshold.
updated README.md for the changes to pixel diff detection.
AI object detection via yolov5 didn't work out too well, in fact it was
crashing the detection threads for whatever reason. I could deep dive
why it was crashing but I think the better solution is to bring back
optical flow detection at the block level. the advantage of this over
object detection is the fact that a block doesn't need to have a whole
object in it.
potentially fixed what was apparently a long standing bug that caused
motion detection to look at just the first block. this bug was found
thanks to the stats output.
re-formed the stats output and moved it out of the motion detect
function.
block pixel diff counts will now no longer stop at the threshold at each
block. it will now count the entire block and output the results in the
stats. the code now also pick the block with the highest pixDiff instead
of stopping at the first block with a high pixDiff.
added object detection code base on yolov5 machine vision model. also
added a stat file so motion and object detection values can be monitored
in real time if used with the 'watch' command.
Broken down the code into multiple files instead having it all in
main.cpp.
Also detached recording from detection by having them now run in
separate threads instead of having motion detection inline with
recording. this will hopefully make it so there is less missed motion
events due to processing overhead.
The recording loop now take advantage of FFMPEG's "-f segment" option
instead of generating the clips implicitly in separated FFMPEG calls.
again, all in hope to reduce missed motion events.
This application have the tendency to detect motion of small insects.
to prevent this it was determined with there will need to be some means
of identifying objects via machine vision. there is an object detection
function but it doesn't currently do anything at this time. this is
something that I will be working on in the near future.
created a test branch in the repository. all early, testing code will
now go in this branch going forward. only fully tested, stable code will
be committed to master going forward.
